Cleaning And Care - Peaq PDR210-W Bedienungsanleitung

ENGLISH
LANGUAGE SELECTION
1. Press MENU and enter System settings
to select the submenu LANGUAGE.
2. Select a language.
FACTORY SETTING
Press MENU and enter System settings to
select the submenu FACTORY RESET. Press
SELECT knob to confirm the selection.
UPDATING THE SOFTWARE
You can search software updates with the
product. Once you have accepted the con-
ditions for use, the download and installation
procedure for the new software updates be-
gins automatically.
Note
Make sure that the product is connected to
the Internet.
SETUP WIZARD
Press MENU and enter System settings to
select the submenu SETUP WIZARD. You
can set up all settings important for bringing
radio into operation
INFO
Here you can find the version number of the
currently used software.
50
IM_PDR210-B/W_140618_V02_HR_1.indb 50

Cleaning and care

• Always pull the power plug from the pow-
er outlet before cleaning.
• Caution! Water must not enter the device.
• Clean the housing with a slightly damp
cloth.
• Do not use any sharp, abrasive or aggres-
sive cleaning agents.
• Do not use any chemicals (e. g. gas, alco-
hol) to clean the housing.
Disposal
Do not dispose of this appliance as
unsorted municipal waste. Return it
to a designated collection point for
the recycling of WEEE. By doing so, you will
help to conserve resources and protect the
environment. Contact your retailer or local
authorities for more information.
Please dispose of batteries in an
environmentally friendly manner Do
not put batteries into the household
waste. Please use the return and collection
systems in your community or contact the
dealer where you purchased the product.
23/6/14 10:58 AM