Power Supply; Lan Connection; Inserting Battery; Usb Connection - Peaq PDR210-W Bedienungsanleitung

ENGLISH
Connections

POWER SUPPLY

Connect the DC connector of the adaptor to
the DC IN-jack. Plug the adaptor to a power
socket.
AUX-IN
You can also listen to external audio devices
by connecting the cable (not included) to the
AUX-IN jack at the back of the product.

USB CONNECTION

Playback of music files
You can playback music files which are
saved on an USB stick by plug in the USB
stick.
Charging external devices
External devices can be charged via USB
with this speaker. Connect the device to the
USB port (output: 5V/ 1000mA)
40
IM_PDR210-B/W_140618_V02_HR_1.indb 40

LAN CONNECTION

Socket of LAN / Ethernet cable connection
for the cable connection of the device with
the cable-connected home network.

INSERTING BATTERY

2
1
Slide the battery compartment cover in the
direction of the arrow and pull it out. Insert
the new battery (CR2032, 3 V
attention to correct polarity. Slide the battery
compartment cover back on and let it snap
into place.
Note
Remove the battery protection strip before
first use.
) , paying
23/6/14 10:58 AM