Device Type; Battery Status - Storch HPM 3000+ Bedienungsanleitung

power than the regular display mode. Therefore this dis-
play mode should only be used for brief operating periods.
When switching the instrument on the low-power night
operation mode is always activated.
5. Menu: Device identification
The fixed data for the instrument can only be observed
under this menu option and not adjusted.

5.1 Device type

The divice type menu option displays HPM 3000+.
5.2 Serial number
The serial number menu option provides information
about the number of the respechtive instrument.
5.3 Versions
The versions menu option provides information about the
version of the software and hardware used.

5.4 Battery status

The battery status menu option displays the power status
of the battery.
6. Application
6.1 Measuring value determination for wood
Main menu
Universal
Softwood
Hardwood
(Other)
1. After selecting the desired type of wood press the mea-
suring head, in which the measuring needles are located,
into the wood to be measured.
2.The measurement is conducted automatically and the
measured value can now be read from the display. The
measured value changes as soon as the measuring need-
les are removed. In order to conduct a one-off measure-
ment the Auto-Hold function must be activated (see 4.4
Measured value display).
6.2 Measuring value determination fpr building material
Wood type
The standard measuring needles should only be used for
soft surfaces and areas that are close to the surface. The
depth measuring sensor, which is available as an optional
accessory, is to be used to conduct measurements deep in
material
1. After selecting the desired type of building material
press the measuring head, in which the measuring need-
Parquet
les are located, into the material to be measured.
Laminate
MDF-board
2.The measurement is conducted automatically and the
Chipboard
measured value can now be read from the display. The
Plywood
measured value changes as soon as the measuring need-
les are removed. In order to conduct a one-off measure-
ment the Auto-Hold function must be activated (see 4.4
Measured value display).
29
Main menu
Anhydrit Estrich
Elastizell Estrich
Gipsestrich
Holz-Zement Estrich
Zementestrich
Zementestrich
Kunststoff
Zementestrich
Bitumen
Beton B 15 200 kg/m
Beton B 25 350 kg/m
Beton B 35 500 kg/m
Gasbeton
Kalkzementputz
Kalkmörtel
Kunststoffputz
Gipsputz
Gips
Backstein-Ziegel
Kalkstein
Kalksandstein
Weichfaserplatten
Spannplatten Zementbindung
Faserzementplatten
Building materials
3
3
3