Data Record - Westfalia FC-2500A Bedienungsanleitung

1. Press the "REL." Button (7) once. In the lower right corner of the display
"REL." is displayed, and to the left of it the last value taken before the REL.
function was engaged, is displayed.
2. The sign before the "REL." display indicates the direction of the deviation
from the reference value.
3. Press „REL." again to leave the relative measurement mode.
Please Notice! The „REL." function is not on disposal while the "DATA HOLD"
or "DATA RECORD" functions are activated.

2.4. Data Record

In the data record mode maximum, minimum and average values from up to
ten measurements can be determined.
1. Press the "RECORD" Button (9) once. In the upper right corner of the
display "R.C." appears.
2. To display the calculated values press the "RECALL" button (10).
3. Press „RECALL" once. In the display ---Hl--- and the highest value taken
during the measuring period (Max-Value) appear. During this display the
"R.C." marker in the display flashes rapidly.
4. Press "RECALL" again. In the display ---LO--- and the lowest value taken
during the measuring period (Min-Value) appear. During this display the
"R.C." marker in the display flashes rapidly.
5. Press "RECALL" for the third time. In the display ---A--- and the average
value calculated from the values taken during the measuring period appear.
During this display the "R.C." marker in the display flashes rapidly.
The average value is calculated from the values taken during last ten
measurements.
6. Press "RECALL" for the fourth time to end the data recall, the measuring
process in the data record mode is continued. "R.C." will stop flashing.
7. Press "RECORD" (9) to leave the data record mode.
Operation
12