Important; Disposal; Registration Number; Accessories - FINO VITESSE SF Gebrauchsinformation

11. Important!

The FINO GmbH has compiled the present user infor-
mation to the effect to support the user in the opera-
tion of the units and to facilitate the implementation
and operation of the unit. The FINO GmbH is not
responsible for damages that are attributed to an
incorrect application or alterations of the unit. An
application for purposes other than the described
leads to the loss of the guarantee. According to its
policy FINO GmbH permanently further develops its
products. FINO reserves the right to put on changes
or improvements to the products described in this
documentation or the document itself without prior
notice. FINO does not undertake any guarantee for
the completeness or correctness of the contents of
this document.

13. Accessories

1-6 FINO DIADISC
1+2 Very flexible diamond discs.
Double-sided 3 mm circular coating with
fine grain (D 30); for crown and bridge work.
3+4 Very flexible diamond discs.
Double-sided 3 mm circular coating with
coarser fine grain (D 54);
5+6 Stable diamond discs with long service-life;
cutting on the edge, double-sided full coating
with coarser fine grain (D 54).
1 2 3 4 5
ISO: 190 220 190 220 190
Thickness: 0,14 0,14 0,20 0,20 0,30
T-65900 X-65901 Z-65904 Z-65905 Z-65908
10
12. Disposal in accordance with
EC Guideline 2002/96/EG
This equipment may not be disposed in
domestic waste! Please contact the manu-
facturer or your dealer!

12.1 Registration number

30926170
7-10 FINO TC-Cutters
Shank-ø 2,35 mm, ISO 104.
Recommended speed range for
all TC milling cutters:
Acc. to ISO 023 5-50.000 rpm
ISO 023-045 15-40.000 rpm
ISO 045-080 15-30.000 rpm
Cross-cut fine
Smoothens surfaces and enables the
delicate shaping of each structure.
Suitable for all dental materials.
6 7 8 9 10
220
0,30 023 045 060
Z-65909 P-60364 C-60365 C-60366

14. Components

1 Control unit
2 Knee-control plate
3 Tabletop stand
4 Socket for motor cable
5 Motor cable
6 Socket for foot switch
7 Foot switch
8 Socket for power supply
9 Power supply cable
10 Attachment bracket
11 Speed control
12 Hand/foot switch
060
C-60367
ENU
13 Direction selector
14 Motor switch
15 Display
16 On/off switch
17 Chuck
18 Crank
19 Test drill
20 Motor
21 Handpiece
22 Handpiece tray
23 Protective sleeve
24 Maintenance tool
11