General And Specific Safety Rules; Work Area; Personal Safety; Tool Use And Care - Enar AX 25 Gebrauchsanweisungen

4

GENERAL AND SPECIFIC SAFETY RULES

WARNING!

4.1 WORK AREA

KEEP your work area clean and well lit. Cluttered benches and dark areas invite accidents.
DO NOT OPERATE power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
KEEP bystanders, children, and visitors away while operating a power tool.

4.2 PERSONAL SAFETY

STAY ALERT, watch what you are doing and use common sense when operating a power tool.
en DO NOT USE TOOL while tired or under the influence of drugs, alcohol, or medication.
DRESS PROPERLY.
DO NOT WEAR loose clothing or jewellery.
CONTAIN long hair.
KEEP your hair, clothing, and gloves away from moving parts.
AVOID accidental starting.
KEEP proper footing and balance at all times.
USE safety equipment.
Always WEAR eye protection.

4.3 TOOL USE AND CARE

DO NOT FORCE tool.
USE the correct tool for your application.
DO NOT USE tool if switch does not turn it on or off.
STOP the machine before making any adjustments, changing accessories, or storing the tool.
STORE idle tools out of reach of children and other untrained persons. .
CHECK for misalignment or binding of moving parts, breakage of parts, and any other condition that
may affect the tools operation.
If damaged, HAVE the tool serviced before using.
USE only accessories that are recommended by the manufacturer for your model.

4.4 SERVICE

Tool service MUST BE PERFORMED only by qualified repair personnel.
When servicing a tool, USE only identical replacement parts.
FOLLOW instructions in the Maintenance section of this manual.
AX25, AX38, AX48
4
TDX0,7m, TDX2m – BACKPACK / VIB-BAR
25MM DIAM. HOSE
READ AND UNDERSTAND ALL INSTRUCTIONS.
BACKPACK / VIB-BAR - FLEXIBLE SHAFT AND POKERS
NUT TO CONNECT TO THE
MOTOR LEFT THREADS
HOSE END REINFORCEMENT
HEX. DRIVER
LEFT THREADS