Ec-Declaration Of Incorporation - Nicotra Rlm E3 Betriebsanleitung

BA-CFD-RLM 9.7 – 03/2017
Translation of the original

EC-Declaration of incorporation

The manufacturer:
herewith declares, that the following product:
Productdesignation:
Type nomination:
Serial n°:
Year of manufacturing:
qualifies as a partly-completed machine, according to Article 2, clause "g" and does
comply to the following basic requirements of the Machine Directive (2006/42/EC):
Annex I, Article 1.1.2; 1.3.7
The uncompleted machine may be put into operation only if it has been stated, that the
machine, into which the uncompleted machine has to be incorporated, does comply
with the requirement of the machine directive (2006/42/EC).
The following harmonised standards
DIN EN ISO 12100: Safety of machines – General design principles
DIN EN ISO 13857: Safety of machinery - Safety distances to prevent hazard zones
being reached by upper and lower limbs
Applied, national standards and technical specifications
VDMA 24167: Fans – Safety requirements
The manufacturer is committing himselfe to make the special documents of partly-
completed machine available to any state authority if required.
Waldenburg, 01th March, 2017
Representativ for the documentation: Michael Hampel
i.V. T. Ehrhardt
Head of Production
1) The complete listing of applied standards and technical specifications see manufacturer's
documentation
2) As far as harmonised standards are not existing
Nicotra Gebhardt GmbH
Gebhardtstrasse 19-25, 74638 Waldenburg, Germany
Plug Fan with direct drive
RLM
see type plate
see type plate
have been applied:
1)
i.V. Dr. J. Anschütz
Research & Development Director
Nicotra Gebhardt GmbH
Gebhardtstraße 19-25
74638 Waldenburg, Germany
www.nicotra-gebhardt.com
particularly:
2)
English
EN-15/16