3M X20 Sicherheitsanleitung Seite 7

• To reduce the risk associated with explosion, and/or chemicals from a leaking
batteries:
- Use only with battery type AA or equivalent. Use only with battery type AA or equivalent.
- Orient the battery's plus (+) and minus (-) terminals of the batteries according to Orient the battery's plus (+) and minus (-) terminals of the batteries according to
the markings found on the remote control.
- Do not leave the battery in the remote for an extended period of time. Do not leave the battery in the remote for an extended period of time.
- Do not carry batteries loose in your pocket or purse. Do not carry batteries loose in your pocket or purse.
- Avoid eye and skin contact in the event that battery would leak. Avoid eye and skin contact in the event that battery would leak.
- Do not mix used and new batteries. Do not mix used and new batteries.
• To reduce the risk associated with the impact of a falling projector:
- Use only the 3M™ brand wall/ceiling mounting hardware kit if wall or ceiling Use only the 3M™ brand wall/ceiling mounting hardware kit if wall or ceiling
mounting is desired.
- Adhere strictly to the proper installation procedure as outlined in the installation Adhere strictly to the proper installation procedure as outlined in the installation
instructions when installing the 3M™ wall/ceiling kit.
• To reduce the risk associated with intense visible light:
- Avoid looking directly into the projector lens while the lamp is on. Avoid looking directly into the projector lens while the lamp is on.
• To reduce the risk associated with tripping and/or impact:
- Position the power cord and data cable so that they cannot be tripped over. Position the power cord and data cable so that they cannot be tripped over.
© 3M 2006
CAUTION
3M™ Multimedia Projector X20 Product Safety Guide 7