Use And Operation; Function Test - auna Karaoke Star 4 Bedienungsanleitung

EN
16

USE AND OPERATION

Wiring the speakers
IMPORTANT: please turn off your amplifier before connecting or
disconnecting speakers
• Ensure that you connect the positive speaker terminal (red) to the
positive (red) amplifier speaker output. Take care to ensure that the
polarity is preserved ie do not connect the negative speaker terminal to
the positive amplifier speaker output.
• Repeat for the negative speaker terminal (black) and the negative
(black) amplifier speaker output.

Function test

Once connected, turn on system start at a low volume and increase
gradually to a comfortable volume level. The system should sound balanced
with good sound reproduction. If the set sounds distorted check to make
sure that the speakers have been correctly wired with your amplifier.
Use of the wireless microphones
• Press button 7 on the front panel to activate the VHF feature. Set the 3
position switch on
• the microphone to ON.
BT mode & pairing
1 Set the input selector switch (10) to BT and press the BT/MP3 (11) button
to select the BT input mode.
2 Activate the BT function on your BT cell phone so that the cell phone
starts searching for BT devices (please refer to the Users' Manual of cell
phone for more details).
3 During search the BT LED is flashing quickly. Select «BT SPEAKER » in
the list of the found devices. The identification code is "0000"
4 After successful pairing the BT LED will flash slowly.