Preliminary Information - switel DE201 Bedienungsanleitung

4

Preliminary Information

This chapter provides basic information on using the operating instruction manual and the tele-
phone.
Description of operating sequences in the manual
Display
a
R
3 sec. *
ë
{í}
è
é
Icons and texts in the handset display
Icon
12−03
CALL MUTED
58
Standby mode
All descriptions in this operating manual assume that the handset is in Standby mode. This is
the case when you are not talking on the phone and if a menu is not open. Press the b button
to enable Standby mode, if necessary.
Energy−save mode
When the handset has been in Standby mode for some time, it automatically switches to en-
ergy−save mode. The buttons and display no longer light up.
Description
Displays the contour of buttons
Press the button depicted briefly
Press the button depicted for 3 seconds
Enter digits or letters
Handset rings
Remove the handset from the base station
Place the handset in the base station
Texts which appear in the display
57
Description
On: Indicates the battery charge status.
Flashing: The batteries must be charged.
Run−through segments: The batteries are being charged; . Page 52.
Displays the time; . Page 61.
A call is currently being made.
There are new calls in the call list; . Page 57.
The handsfree facility is activated; . Page 59.
The key lock function is activated; . Page 59.
The microphone is deactivated (muted); . Page 59.
On: The connection to the base station is good.
Flashing: The connection to the base station is interrupted. Move nearer
to the base station.
59
54