Standby Mode; Navigation Buttons - switel DF 821 Bedienungsanleitung

Standby mode

75
All descriptions in this operating manual assume that the handset is in
Standby mode. The system switches to Standby mode by pressing the
button.
Energy−save mode
When the handset has been in Standby mode for some time, it automati-
cally switches to energy−save mode. The display no longer lights up. Press
any button to reactivate Standby mode.

Navigation buttons

The softkeys (4) and (17) are assigned different functions in the different
menus. The function buttons are always referred to in this manual accord-
ing to the texts directly above them in the display.
17
15
14
Button In Standby mode
4 − Open the phone book
6
7 − Open the call list
14 − Open the redialling list
15
17 − Open the main menu
Navigating in the menu
4
6
7
In a menu
Creating phone book entries − example
− Move one level back
− Scroll through the menu
− Change the settings
− Change the settings
− Scroll through the menu
− Change the settings
− Change the settings
− Open the menu displayed
Preliminary Information
76
All the functions can be accessed via the various menus. Refer to Menu
Structure, . Page 77, for information on how to access each function.
Menu
Open the main menu
y / z
Select the submenu required
Select
Open the submenu
y / z
Select the function required
Select
Open the function
y / z
Select the setting required
ë
Use the digit keys to enter numbers or
letters
Select
Confirm the input
Back
Move one level back
Cancel the programming/saving
processes, activate Standby mode
Every process is automatically cancelled if there is no input within
30 seconds.
Proceed as in this example for all the settings.
Menu
Open the menu
y / z, Phonebook , Select
Select the phone book and confirm
y / z, Add , Select
ë, z
Enter the name and continue
ë, z
Enter the phone number and continue
o / q, OK
Select the melody and confirm it
Press and hold the # button for 2 seconds: Switch between upper
and lower case.
77
Select the function and confirm it
71