switel TE16 Bedienungsanleitung Seite 64

Settings
Operating on PABX systems
45
Access code for PABX systems 46
When using private branch exchanges, it is necessary to dial an access code to obtain
the dialling tone for an outside line. The number for an outside line is often "0" or "9".
Dial this number first and wait for the dialling tone. You can then dial the actual phone
number.
You can store a two-digit access code number for PABX systems in the phone which is
subsequently predialled each time you call back a call received from the list and the
number being called has more than 6 digits.
Proceed as follows to save an access code for PABX systems:
E
A /
A / B, E
Then wait 12 seconds. The settings are accepted.
Flash function for PABX systems 47
Your telephone supports supplementary services provided by your telephone network
provider, such as brokering, call waiting and conference facilities. These supplementary
services can be used by implementing the I button. The Flash time of the phone is
100 ms. Also contact your telephone network provider with regard to enabling supple­
mentary services.
Setting Auto-IP
If you want to integrate the phone within a network for Internet telephony, you can ob­
tain the IP address for the phone automatically by activating this function.
Proceed as follows to obtain the IP address automatically:
E
a /
a /
64
B
SET 3 PCODE E
If the access code you want to save only has one digit, simply leave the
remaining position free.
Internet telephony is not common in Europe and, therefore, is not suppor­
ted by every Internet provider. For more detailed information on this topic,
contact your Internet provider.
B
SET 4 AUTO IP E
B
ON / OFF E
Press the button
Select the menu option and confirm it
Enter the digits of the access code
required in succession and confirm each
entry by pressing the E button.
Press the button
Select the menu option and confirm it
Switch the function on or off