Dismantling, Transport And Storage; Dismantling; Transport And Storage; Disposal - CAT X120 Bedienungsanleitung

6 Dismantling, Transport and Storage

6.1

Dismantling

1. Switch the unit off.
2. Disconnect it form the mains supply.
3. Remove any glass beakers and any other equipment
around the
4. Remove the homogenizing tool by loosening the knurled
screw (3).
5. Loosen the cross over clamp and remove the clamp from
the support rod.
6. Unscrew the support rod.
7.
Now you may remove the instrument from the working
.
area
6.2

Transport and Storage

Prior to transport:
Switch the instrument off and proceed with dismantling as described under "Dismantling".
Place the instrument and its parts in its original packaging or another suitable container to
protect it during transport. Close the packaging with adhesive tape.
Store the instrument in a dry environment. Please observe the specified conditions of the
ambient (temperature and humidity).
Do not subject the instrument to mechanical shocks or vibration during transporting it.
In case you do not use the original packaging please mark the box with the following
notes:
 Glass symbol (handle with care, fragile)
 Umbrella (keep dry)
 Content (list of content)
 Storage ambient:
Max. ambient temperature :
Max. humidity:

7 Disposal

Please dispose of used instruments and defective components at your local
recycling collection point. Prior to disposal, sort according to materials: metal,
glass, plastic, etc. Also be sure to dispose of the packing material in an
environmental-friendly manner.
Bedienungsanleitung/Instruction Manual X120_2011/05 V1.04
drive unit
.
RT to +40°C
80%
Page/Seite 12 von/of 31