ECG VM 2120 HOBBY Bedienungsanleitung Seite 28

than 8 years and under supervision. Children under 8 years old must keep away from the appliance and
its power supply.
DESCRIPTION OF THE VACUUM CLEANER
E
D
C
GB
B
A
K
List of parts
1. Hose connection connector
2. Combined floor nozzle
3. Extension tube
4. Valve for air flow adjustment
5. Hose handle
6. Hose
7. On/Off switch
VACUUM CLEANER ASSEMBLY
If any part of the vacuum cleaner is missing or damaged, do not assemble the vacuum cleaner and contact
your vendor. The vacuum cleaner must be switched off and disconnected from power before you start to
assemble it!
1. Release the lock of the motor unit and remove it together with HEPA filter out of the dust container.
Remove the wheels and the nozzles from the container (
2. Turn upside down the vacuum cleaner dust container and attach four wheels into the slots in the base.
Make sure that the wheels can turn freely (
3. Place the motor unit with the installed filter on the vacuum cleaner container. Snap the motor unit lock on
the to the locks on the body of the vacuum cleaner.
4. Insert the end of the hose into the opening in the body of the vacuum cleaner and lock it by turning
clockwise (
3
5. Plug the electric cable in the electric outlet (
switch 7.
28
).
F
G
H
I
J
L
8. Handle
9. Motor unit lock
10. Power cord
11. Dust container
12. Wheels
13. Combined floor nozzle
14. Combination tapered nozzle and dust brush
).
1
).
2
). The vacuum cleaner is now ready to turn on using the
4
M
N