Specifications - Makita HM0871C Bedienungsanleitung

ENGLISH
1-1. Switch lever
2-1. Adjusting dial
3-1. Power-ON indicator lamp (green)
3-2. Service indicator lamp (red)
4-1. Side grip (auxiliary handle)
5-1. D-sided side handle
5-2. Clamp nut
6-1. Bit shank

SPECIFICATIONS

Blows per minute
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for chiselling work in concrete, brick,
stone and asphalt as well as for driving and compacting
with appropriate accessories.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For Model HM0871C
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode : chiseling function with side handle
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : chiseling function with side grip
Vibration emission (a
Uncertainty (K) : 2.0 m/s
Explanation of general view
6-2. Bit grease
7-1. Releasing cover
9-1. Releasing cover
10-1. Change ring
14-1. Screws
15-1. Connector
15-2. White
15-3. Black
Model
Overall length
Net weight
Safety class
) : 86 dB(A)
pA
) : 97 dB(A)
WA
value (tri-axial vector
2
) : 8.0 m/s
h,CHeq
2
2
) : 8.0 m/s
h,CHeq
2
HM0871C
466 mm
5.6 kg
ENE045-1
For Model HM0870C
Noise
The typical A-weighted noise level determined according
ENF002-1
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Vibration
The vibration
determined according to EN60745:
Work mode : chiseling function with side handle
Vibration emission (a
ENG102-3
Uncertainty (K) : 1.5 m/s
Work mode : chiseling function with side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
For European countries only
EC Declaration of Conformity
We Makita
ENG216-2
manufacturer declare that the following Makita
sum)
machine(s):
Designation of Machine:
Demolition Hammer
Model No./ Type: HM0871C, HM0870C
are of series production and
ENG306-1
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
4
16-1. Crank cap cover
16-2. Screwdriver
17-1. Grease
18-1. Connector
18-2. White
18-3. Black
HM0870C
-1
1,100 - 2,650 min
449 mm
II
) : 87 dB(A)
pA
) : 98 dB(A)
WA
Wear ear protection
total value (tri-axial
) : 11.0 m/s
h,CHeq
2
) : 11.5 m/s
h,CHeq
2
Corporation as the
5.1 kg
ENG102-3
ENG216-2
vector sum)
2
ENG306-1
2
ENH101-13
responsible