Installation Of The Webui Software - HomeMatic CCU3 Montage- Und Bedienungsanleitung

Start-up
• Enter the IP address into your web browser. The
WebUI home page is opening.
7.3

Installation of the WebUI software

When starting the CCU3 for the first time, please update
the software of your device via the WebUI. Please
proceed as described and follow the instructions in the
WebUI user interface.
• Open the homepage of your WebUI. Therefore,
please enter the IP address into your web brows-
er.
• Click on the button "Update".
42
• First click on the "Download" button to save the
software files to your PC.
• Accept the license agreement and click on "In-
stall" afterwards.
• Save the file on your PC.
• Select the downloaded software via "Select file".
• Click on "Upload" to load the software to your
Central Control Unit. This process may take a few
minutes.
• As soon as the software file is uploaded to your
CCU3, accept the license agreement again and
click "Install".
• Confirm the update via the button "Start update".
The software update is now in progress.
Once the software update has been carried out, you will
need to register on the Central Control Unit again. The
full range of functions will then be available for your Cen-
tral Control Unit.
Start-up
43