Main Components - inshape 17402 Gebrauchsanweisung

Allow the coverplates to rest on the
horizontal frame.
Connect the signal wire to the computer
and screw the computer securely to the
handle using screws (M8).
GB
Lift the coverplates and screw the legs to
the upright frame securely to the horizontal
frame using screws (M8).
Screw the coverplates securely using screws
(M4).
36
Remove the transport screw on the side of
the treadmill once it is fully assembled.
The treadmill is now assembled and ready
for use.

Main components

1. Computer
2. Handle
3. Upright frame
4. Motor cover
5. Belt
6. Adjustment screws
7. Frame
8. Base frame
9. Pedal for folding
10. Cylinder