Autoadapt DTS Gebrauchsanweisung Seite 34

34
DTS Driver Test Station Autoadapt
Timer test, controls
1
Press Timer Test A and then Left Hand
B.
2
Explain the test to your client /
Start accelerating. Focus on the timer
in the white box. Once the value
indicated in the yellow box is reached
the timer will start. Then brake as
quickly as possible. The shorter the
time displayed on the timer, the better
the result.
3
Press the Start button C. When the
green light comes on, your client can
start the test when they feel ready.
4
Save the value D and reset E.
Up to eight values can be saved. The
test report will show all values. Repeat
steps 3 and 4 until the desired number
of values has been saved.
5
Press Right Hand F to change hands.
Repeat steps 3 and 4.
Timer test, pedals
1
Press Timer Test A and then Pedals B.
2
The test can be implemented in three
different ways: with the right foot, the
left foot or both feet at the same time.
If only the left foot is to be tested, use
the accelerator pedal on the left, which
comes supplied.
3
This test works in the same way as the
previous one. Repeat steps 2 to 4 for
timer test, controls.
A
B
A
B
C
E
D