Autoadapt DTS Gebrauchsanweisung Seite 32

32
DTS Driver Test Station Autoadapt
Power test, steering wheel
1
Press Power Test A and then Steering
Wheel B.
2
Choose which hand is to be tested
from the options in the drop-down list
C. The test report will show all options
tested.
3
If your client wants or has to use a
wheel spinner, first test which option
best suits them. Then check the wheel
spinner selected in the drop-down list
D.
If your client wishes to change the
wheel spinner while the test is in pro-
gress, a corresponding model should
be selected in the drop-down list.
4
Completely reduce the resistance on
the steering wheel. The resistance is
adjusted with the knob which is on the
steering wheel control rod.
Ask your client to turn the wheel to
the left at an equal speed at a pace that
feels right for them.
Gradually increase the resistance of the
steering wheel until your client finds it
hard to turn the wheel one full turn. A
value will appear in the white box for
the direction which is under test.
5
Save the value E and reset F. Repeat
steps 4 and 5, but this time your client
must turn the wheel to the right.
6
Repeat steps 2 to 5 until all options
which require testing are complete.
A
B
E
C
D
F