Autoadapt DTS Gebrauchsanweisung Seite 31

Saving specific information
1
The information entered and selected
here will be visible in the test report.
Log in with the password / autoadapt.
Then press Driver Test A.
2
Make sure the date setting B is correct
on the computer, otherwise the test
reports will have the wrong date on
them.
3
Select an operator from the names in
the drop-down list C.
4
Enter the required client information
D. Please note that in certain coun-
tries it is a criminal offence to save this
information. If this is the case, the fields
can be left empty and the information
entered by hand on the report print-
out. No digital data can then be linked
to a specific client.
5
Press Next Step E to access the first
page where the various tests can be
selected. Press Reset all F to ensure no
previous test result remains.
You can press Help G at any time while
the test is in progress. The tests are
then displayed in the recommended
ranking as described on the previous
page. You can also move the cursor
over the button. This will display the
window for a short time only; it will
then automatically disappear.
Autoadapt Driver Test Station DTS
A
D
E
F
G
31
EN
B
C