Autoadapt DTS Gebrauchsanweisung Seite 33

Power test, controls
1
Press Power Test A and then Hand
Control B.
2
Ask your client to brake and accelerate,
respectively, as hard as they can using
their left hand. A value will appear in
the white boxes for the relevant move-
ment.
3
Save the value C and reset D.
4
Up to eight values can be saved for
each movement. The test report will
show all values. Repeat steps 2 and 3
until the desired number of values has
been saved.
Repeat steps 2 and 3, but this time
your client must brake and accelerate,
respectively, using their right hand.
Power test, pedals
1
Press Power Test A and then Pedals B.
Agree with your client which foot is to
be tested. If the left, use the accel-
erator pedal on the left, which comes
supplied.
This test works in the same way as the
previous one. Repeat steps 2 to 4 for
power test, controls.
A
B
D D
C C
A
B
Autoadapt Driver Test Station DTS
33
EN