Aspirating Liquid - StarLab ErgoOne FAST Bedienungsanleitung

5.5 Aspirating liquid

The speed of aspirating liquid is adjusted steplessly. For this the control knob is pressed at
different depths.
NOTICE! Damage to device due to missing or damaged membrane filter.
›
Do not use the pipette controller if the membrane filter is not inserted.
›
Replace the membrane filter if it is damaged.
Consider the type of pipette used.
Fig. 6: Aspirating liquid
1. Immerse the pipette into the liquid.
2. Slowly press the aspirating button and
keep it pressed down. The further the
aspirating button is pressed, the quicker
the liquid will be aspirated.
3. Wipe the pipette on the tube inner wall
and remove it.
ErgoOne FAST · User Manual ·
21