Proper Use - EINHELL RT-VE 550 A Originalbetriebsanleitung

Anleitung_RT_VE_550_A_SPK1__ 15.11.13 11:30 Seite 13
Important!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating instructions with
due care. Keep this manual in a safe place, so that
the information is available at all times. If you give
the equipment to any other person, hand over these
operating instructions as well. We cannot accept any
liability for damage or accidents which arise due to a
failure to follow these instructions and the safety
instructions.
1. Layout (Fig. 1-2)
1. Dust bag hook
2. Dust bag
3. Quick clamp device for dust bag
4. Transportation handle
5. Quick clamp device for debris bag
6. Debris bag
7. Base plate
8. Chassis
9. Strengthening plate
10. Wheels
11. Extractor hose
12. Side panels
13. Plastic housing
14. Hole for dust bag hook
15. ON/OFF switch with automatic function
16. Motor
17. Reduction adapter
18. Connection adapter
19. Automatic socket-outlet
1.2 Assembly material
A. 2 x Hose fastening
B. 4 x Screw for strengthening plate
C. 8 x Nut
D. 4 x Screw for chassis
2. Supplied package (Fig. 2)
Open the packaging and take out the equipment
n
with care.
Remove the packaging material and any
n
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
n
Inspect the equipment and accessories for
n
transport damage.
If possible, please keep the packaging until the
n
end of the guarantee period.
IMPORTANT
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts. There is a danger of
swallowing or suffocating!
Dust bag hook (1)
n
Dust bag (2)
n
2 x Quick-release device (3/5)
n
Debris bag (6)
n
Chassis (8)
n
Strengthening plate (9)
n
Suction hose (11)
n
2 x Side plate (12)
n
Plastic housing (13)
n
Connection adapter (18)
n
Assembly material (see point 1.2)
n
Original operating instructions
n
Safety instructions
n

3. Proper use

The vacuum extraction system is designed for
extracting chippings and dust arising from the
processing of wood or wood-type materials. Never
use this equipment in an environment where there is
a risk of fire and explosion.
The machine must only be used for its intended
purpose!
Any other use is deemed to be a case of misuse.
The user/operator and not the manufacturer will be
held liable for damage and/or injuries of any kind that
result from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
To use the machine properly you must also observe
the safety regulations, the assembly instructions and
the operating instructions to be found in this manual.
All persons who use and service the machine have
to be acquainted with this manual and must be
informed about the machineʼs potential hazards.
It is also imperative to observe the accident
prevention regulations in force in your area.
The same applies for the general rules of
occupational health and safety.
GB
13