ZENEC ZE-MC190 Bedienungsanleitung Seite 73

01 POWER OFF/VOL
Rotary.encoder..Press.this.encoder.to.turn.on.the.unit,.press.and.hold.to.turn.off..
Rotate.clockwise/anticlockwise.to.adjust.the.volume.
02 IR REMOTE CONTROL RECEIVER
03 PREVIOUS
04 MUTE
Press.the..( ).button.to.mute.the.volume.and.press.the.button.again.to.restore.the.
volume.
05 SRC
Press.once.to.select.playing.mode.
06 PLAY/PAUSE
Press.once.for.play/pause.
07 NEXT
8 DISK SLOT
9 RESET
10 SMART DIAL
Rotary.encoder..Press.this.encoder.to.access.MAIN.menu..Rotate.clockwise/
anticlockwise.to.select.desired.item.and.press.once.to.access.or.confirm.
11 EJECT
Press.once.for.disc.insertion/ejection.
12 INFO
DVD.mode:.Press.to.display.playback.information.on.the.screen..Press.and.hold.to.
access.the.picture.setup.
13 ANGLE–
Press.the.button.to.adjust.the.downward.tilt.angle.of.the.screen.one.step.at.a.time...
Press.and.hold.this.button.to.continuously.adjust.the.downward.tilt..
Press.this.button.to.adjust.the.picture.settings.in.picture.setup.
14 ANGLE+
Press.the.button.to.adjust.the.upward.tilt.angle.of.the.screen.one.step.at.a.time...
Press.and.hold.this.button.to.continuously.adjust.the.upward.tilt..
Press.this.button.to.adjust.the.picture.settings.in.picture.setup.
15 TFT DISPLAY
16 OPEN
Press.the.OPEN.button.to.activate.the.automatic.mechanical.system.and.move.the.
TFT.monitor.into.viewing.position..Press.again.to.close.the.TFT.
17 DISP
Press.the.DISP.button.to.display.system.information.on.the.LCD.screen.
18 LCD DISPLAY
19 AS/PS (Auto.store/program.scan).
Press.to.auto.store.strong.radio.stations.in.the.1.preset.channels.in.the.current.band...
Press.and.hold.to.start.to.scan.radio.station.
7 7
ENGLISH ENGLISH