Herunterladen Inhalt Inhalt Diese Seite drucken

Functional Description - Makita UV3600 Original Bedienungsanleitung

Elektro-vertikutierer
Vorschau ausblenden Andere Handbücher für UV3600:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Store the machine in a dry room. Keep it out of reach of
children. Never store the machine outdoors.
Vibration
People with poor circulation who are exposed to exces-
sensation, alteration of skin color or of the skin. If any of
these symptoms occur, see a physician.
equipment and accessories.
WARNING:
operation. It is recommended that persons with medical
implants should consult their doctors and implant
ASSEMBLY
CAUTION:
Always be sure that the machine is switched off and
Assembling the handle bar (Fig. 2, 3)
1) Fasten the lower handle bar (4) to the machine with
the knobs (11).
2) Place the upper handle bar (3) onto the lower handle
bar, and then fasten them with two spacers, nut, and
the lever (7).
3) Fasten the cord with the clips (8) onto the handle bar.
Assembling the grass catcher
CAUTION:
when used without a catcher, full eye protection shall
be worn.
NOTE:
The performance of the machine reduces when the
basis before it becomes completely full.
on the machine.
Cord strain relief (Fig. 4)
The cord strain relief (5) helps to prevent the cord from
Make a small loop at the end of the mains cord, and pass
Always take the position of the cord into consideration
point to the power supply to prevent the cord from ac-
Removing or installing cutting tool
CAUTION:
your operation.
Before operation, make sure two bolts, which hold the
Removing cutting tool
2) Remove the handle from the machine.
washers.
Installing the cutting tool

FUNCTIONAL DESCRIPTION

WARNING:
Otherwise it may cause electric shock.
Do not use the machine if the switch does not turn it
on and off. Have defective switches replaced by Makita
authorized service center.
Start/stop lever
To start the machine, press and hold the lock-off button
(2), and then fully pull the start/stop lever (1) and hold it.
the lock-off button.
To stop the machine, simply release the start/stop lever.
Handle angle adjustment
1) Unlock the handle clamps (6).
Height adjustment
7

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis