AEG SCT51800S0 Benutzerinformation Seite 18

18 www.aeg.com
Ha
Hc
8 mm
Hb
8 mm
K
Push the part (Hc) on the part (Ha).
Open the appliance door and the kitchen
furniture door at an angle of 90°.
Insert the small square (Hb) into guide
(Ha).
Put together the appliance door and the
furniture door and mark the holes.
Ha
Remove the brackets and mark a distance
of 8 mm from the outer edge of the door
where the nail must be fitted (K).
Ha