Maintenance And Care - Grundig 5101 RDS Serviceanleitung

Compact Disc (CD) with
"GRUNDIG CD Changer"*
Selecting the CD programme source Selecting or repeating a track
¡
Briefly (repeatedly) press the button until the
Repeatedly press the S OURCE button until the
number of the desired track is shown in the
display indicates "MC01".
display.
"
(TRACK + ) button: go to next track.
1
Switching the display "
(TRACK – ) button: go to previous track or
4
repeat current track.
"
Briefly press the 2 (DISPLAY)button.
Fast forward and reverse
"CD 1 TO1": 1st CD - 1st track, or
"TO1 O1: 15":
1st track - playing time of 1st To listen to tracks in "Quick preview" at
track. reduced volume:
Forward Press and hold down the
Rewind: Press and hold down the
Selecting a CD
"
(DISK + ) button, or
3
Playing the 1st track on every CD
for approx. 10 seconds (CD SCAN)
" (DISK – )-button. Briefly (repeatedly)
6
press the button until the num- "
Press the (DISK + ) button until the signal
3
ber of the desired CD appears in
sounds:
the display.
"CD SCAN" appears briefly in the display.
If the played track is to be retained:
CD pause
"
Press the (DISK + ) button until the signal
3
sounds:
"
( ) button. Press to pause and press
5
"RESET" appears briefly in the display.
again to continue.
EXPERT
Settings
3. Activating the setting
EXPERT control level
"
LOUD
Briefly press the
EXPERT
A great number of possible settings " " appears in the display
E
(" " = entry).
To make car radio operation as easy as possi-
E
ble, numerous settings that you need only
RDS – – – TP AF LOUD MONO
once or occasionally are located in an additio-
nal control level (EXPERT).
DX LCD88825
E
Setting
4. Changing the setting
1. Activating the EXPERT function
"
LOUD
Set the desired contrast using the
Press the button until the signal
EXPERT
knob. The display indicates, for example:
sounds.
RDS – – – TP AF LOUD MONO
2. Selecting settings
Select from
DX
LCD88853
1 ßI
E
Possible settings ...
the setting you wish to check or alter.
Example:
5. Ending the setting
1
"
LOUD
Change display contrast Briefly press the
EXPERT
LCD 25
" " disappears from the display.
E
¢ ¢
Turn the rotary knob until the desired
6. Selecting the next setting
setting "LCD 25" appears in the display.
(repeat the steps 2 to 5)
7. Deactivating EXPERT
"
LOUD
Press the button until the signal
EXPERT
sounds.
Playing the tracks on a CD in random
order (TRACK RANDOM)
"
Press the (TRACK – ) button until the
4
signal sounds:
"TR RND" appears briefly in the display.
Terminate:
"
(TRACK – ) button until the
Press the 4
signal sounds:
"RESET" appears briefly in the display.
Playing the tracks on a CD for approx.
>
button.
10 seconds (TRACK SCAN)
<
button.
"
Press the (TRACK + ) button until the
1
signal sounds:
"TR SCAN" appears briefly in the display.
Terminate:
"
(TRACK + ) button until the
Press the 1
signal sounds:
"RESET" appears briefly in the display.
*Your specialised dealer can inform you
which Grundig CD changer is suitable.
1 ßI
Possible settings ...
button:
Indication in the display: "......"
1
Contrast of the LCD display
CR
"LCD 25" (00 ... 63). Set according to the
location of the car radio so that the
display can optimally be read off.
2
Security LED (on/off)
"BLK ON" The security LED is flashing when
¢ ¢
rotary
the radio is switched off and the
ignition is switched on.
"BLK OFF" The security LED does not flash.
CR
3
Sound signal (on/off)
"BEEP ON" Sound signal as function ack-
nowledgement.
"BEEP OFF" Function acknowledgement by
brief muting.
button:
Compact Disc (CD)
Ending CD mode
Playing CD's in random order
(CD RANDOM)
¡
Briefly press the S OURCE button to select
" another programme source.
Press the (DISC – ) button until the signal
6
sounds:
"CD RND" appears briefly in the display.
Terminate:
"
Press the (DISC – ) button until the signal
6
sounds:
"RESET" appears briefly in the display.
Enabling traffic announcements
during CD play
Activating TP
¡
Briefly press the button.
TP/AF
"TP" appears in the display.
De-activating TP
¡
Briefly press the button.
TP/AF
"TP" disappears from the display.
4 "IGN OFF" Switching on and off is only possi-
"
Autom. LEARN (radio mode)
ble with the
If you are in a reception area in which
7
reception of RDS programmes with traffic CD or AUX input sensitivity
announcements is poor, you can disable
Adapting a CD changer of an AUX audio
the "Autom. LEARN (LRN) in radio mode"
programme source.
function.
"MCD LOW" low
"LRN ON": autom. LEARN
"MCD MID" median
"LRN OFF": no autom. LEARN for volume set-
"MCD HIGH" high (e.g. MCD 30)
tings greater than "VOL 4".
8
5 Volume limitation when switching on
Autom. change of regional programme
"ON VOL - -": no limitation or
If an RDS programme consists of various
"ON VOL 20": max. volume, e.g. 20
regional programmes, it may occur that
(- - ... 40).
your car radio changes between regional
The volume is limited only if the volume
stations when changing the reception area.
when the car radio is switched off is
"REG ON" autom. change of regional
greater than the set value!
programme is possible.
9
"REG OFF" no change of regional Minimum volume for traffic
programme is possible. announcements
6
"TA VOL 16" (10 ... 40)
Switching on and off with the
You hear the set volume while making the
ignition/start switch
setting.
"IGN ON" It is possible to switch the radio on
ßI
and off with the ignition/start Activating the coding (for detailed infor-
switch of the vehicle.
mation see the chapter "Coding").
If "CODE" appears in the diplay, coding is
not activated.
If "SAFE" appears in the display, coding is
activated.
CD or DAT Mode
Connecting a CD or DAT player
CD = Compact Disc (without CD changer)
DAT = Digital Audio Tape
If you have not connected a GRUNDIG CD
changer, you can also connect other CD
players of DAT players via a suited connecting
cable to the car radio (connect contact C 13 to
earth contact C 15).
Activating CD or DAT mode
(AUX mode)
Selecting the CD or DAT programme source:
¡
Repeatedly press the button until "AUX"
S OURCE
appears in the display.
¡
TP/AF
¡ " "
S OURCE 1 – 6

Maintenance and Care

EXPERT
Your car radio has been designed throughout
IO to ensure maintenance-free operation over an
button.
POWER
extended period of time.
If a malfunction
should occur, please consult your dealer.
In the Federal Republic of Germany, Grundig
car radios can be exchanged by your dealer
on request for a works-tested exchange unit
in the event of a defect occuring.
Please note:
It is a condition for your dealer to participate
in this exchange system that the guarantee
seal on your car radio is not damaged.
Cassettes must not be subjected to high
temperatures (see manufacturer's specifica-
tions) and should be put into their case after
use.
The front panel of the car radio must only be
cleaned with a soft, dust-absorbent, anti-static
cloth. Polishing and cleansing agents may
damage the surface of the trimplate.
The tape head must be free of tape dust in
order to avoid losses in the treble tones
during playback. Therefore you should clean
the tape head with a cleaning cassette after
every 50 –100 hours of operation.