Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Amplifier
Switching on and off on the car radio
TRE (Treble)
"
IO
¡
Press the
button.
Briefly press the
T RE/BAL
button.
POWER
The display indicates:
"TREB - 8"..."TREB 00"..."TREB + 8"
Volume
¢ ¢
Use the
rotary knob to change the setting.
¢ ¢
Turn the
rotary knob.
Terminate the setting:
The display indicates:
¡
Briefly press the
button two times,
T RE/BAL
"VOL 00" ... "VOL 50"
or automatically after approx. 10 seconds.
Immediate median setting:
LOUD (loudness)
¡
Press the
T RE/BAL
button until the signal
sounds.
This function improves the sound quality at
low volume levels.
Loudness on/off
"
LOUD
Briefly press the
button.
EXPERT
With "Loudness" on, the display indicates
"
"
IO
IO
"LOUD"
POWER
POWER
¡
B A/FAD
Radio
After selecting the desired range, you will hear
Selecting the RADIO programme source
the station last tuned to in this range
(Last-station-memory).
In cassette or CD mode:
¡
Repeatedly press the
button until the
S OURCE
display indicates "RADIO".
Stereo reception (only with VHF)
You are receiving a stereo broadcast if the
Range selection
display indicates "
".
VHF range
Manual switching to mono:
"
U III
Briefly press the
stepping button:
LEARN
If reception conditions are poor, for example
U I, U II or U III.
in the mountains, the sound quality can be
improved by switching manually to mono
AM range
reception.
¡
Briefly press the
stepping button:
A M AS
¡
Briefly press the
M ONO/Cr
the display indicates "MW" for Mediumwave
The display indicates "MONO".
and "lW" for Longwave.
To switch back to stereo:
¡
briefly press the
M ONO/Cr
¡
¡
¡
M ONO/Cr
A M AS
TP/AF
"
¡
"
"
PTY
S OURCE
1
–
6
DX
BAL (Balance)
Left
right loudspeaker.
¡
Briefly press the
T RE/BAL
button two times.
The display indicates:
"BAL L31"..."BAL L - - R"..."BAL R31"
Lef
Median position
Right
¢ ¢
Use the
rotary knob to change the setting.
Terminate the setting:
¡
Briefly press the
T RE/BAL
button, or automati-
cally after approx. 10 seconds.
Immediate median position:
¡
Press the
button until the signal
T RE/BAL
sounds.
"
"
LOUD
LOUD
¢ ¢
¢ ¢
EXPERT
EXPERT
¡
"
"
T RE/BAL
1
–
6
Setting RDS programmes with the
LEARN memory
With the push of a button
you can store up to 24 RDS programmes in
the LEARN memory!
You can call up the stored RDS programmes
one after the other.
Using the LEARN memory is of advantage if
you are in an unknown reception area and do
not wish to clear the stored stations.
Allocating the LEARN memory
button.
Ranges: U I, U II or U III.
"
Press the
U III
button until the signal
LEARN
sounds:
button.
"LRN ..." appears in the display and the radio
scans the VHF range.
"
U III
LEARN
RDS programmes (max. 24) being received in
the reception area are stored in memory.
After storing you will hear the RDS program-
me having the best reception quality.
If "TP" is selected, you will only hear RDS
programmes broadcasting traffic announce-
ments.
Terminate the setting:
BASS
¡
Briefly press the
button, or automati-
B A/FAD
¡
Briefly press the
B A/FAD
button.
cally after approx. 10 seconds.
The display indicates:
Immediate median position:
"BASS - 8"..."BASS 00"..."BASS + 8"
¡
¢ ¢
Press the
B A/FAD
button until the signal
Use the
rotary knob to change the setting.
sounds.
Terminate the setting:
¡
Briefly press the
button two times, or
B A/FAD
Tone memory
automatically after approx. 10 seconds.
It is possible to store various sound and
Immediate median position:
¡
fader/balance settings by means of the
Press the
B A/FAD
button until the signal
memory position buttons
sounds.
Storing settings
FAD (Fader)
Set the bass, treble, fader, balance, and
loudness as desired.
Front
rear loudspeaker
When you are in one of the various setting
¡
Briefly press the
button two times.
modes, press, for example, the memory
B A/FAD
"
¢ ¢
position button
until the signal sounds.
Turn the
rotary knob:
1
"FAD R31" ... "FAD R - - F" ... "FAD F31"
The display indicates "SOUND 1".
The set values are stored in memory.
Rear
Median position
Front
¢ ¢
Use the
rotary knob to change the setting.
Calling up the LEARN memory
Autostore in the AM range
<
>
Briefly press the
or
button:
Select the desired range: MW or LW
"RDS SCAN" appears in the display.
¡
Press the
button until the signal
A M AS
After that you will hear the next RDS pro-
sounds.
gramme stored in the LEARN memory.
The display indicates "AS" and the frequency
scrolls.
Automatic station store
After that you will hear the programme having
Autostore
the best reception quality.
Autostore in the RDS range
Setting stations/RDS programmes with
Select the desired range: U I, U II or U III
the search function
"
U III
Press the
button until the 2nd signal
LEARN
sounds.
Select the desired range: U I, U II or U III.
The display indicates, for example,
The display indicates "AS" and the frequency
"FM 92.70".
scrolls.
The search stops at the next station or RDS
After that you hear the programme having the
programme.
best reception quality.
<
>
Press the
-or
button until the signal
The 6 strongest stations of the selected range
sounds.
are automatically stored in the programme
"
"
The search function is set to maximum
positions
1
–
6
.
sensitivity if
"DX" appears in the display.
– This occurs automatically after the first scan
of the entire frequecny range.
– Switching manually to "DX":
"
PTY
Press the
button until the signal
DX
sounds.
Amplifier
Calling up settings
¡
¡
Press the
or
button and then,
B A/FAD
T RE/BAL
for example, briefly press the memory position
"
button
1
.
The display indicates "SOUND 1".
Calling up median settings
¡
¡
Press the
or
button and then the
B A/FAD
T RE/BAL
"
memory position button
,.
6
The display indicates "LINEAR".
All values are set to their median settings.
"
"
1
–
5
.
Radio
– Switching off "DX" :
"
PTY
Press the
button until the signal
DX
sounds.
Only stations/RDS programmes with traffic
announcements are seareched if
"TP" appears in the display.
¡
On/off: press the
TP/AF
button.
Manual frequency tuning
1. Select the range: U I, U II or U III
,
MW or LW.
<
>
2. Press the
or
button until the 2nd
signal sounds.
The display indicates "MAN" and the
frequency tuned to.
3. Tune to the desired frequency:
<
>
Press the
or
button
briefly (frequency steps) or a longer time
(fast frequency scroll). The display indi-
cates, for example, "MAN 92.70".
4. Terminate frequency tuning:
"
¡
U III
Press the
or
A M AS
or
LEARN
¡
TP/AF
button.
Werbung
Inhaltsverzeichnis
