Introduction; Fcc Class B Compliance Statement - Elinchrom BRX 250 Gebrauchsanleitung

Introduction

English
Dear Photographer,
Thank you for buying your BRX compact flash unit.
All Elinchrom products are manufactured using the most advanced technology. Carefully selected com-
ponents are used to ensure the highest quality and the equipment is submitted to many controls both
during and after manufacture. We trust that it will give you many years of reliable service.
All BRX flash units are manufactured for the studio and location use of professional photographers. Only
by observance of the information given, can you secure your warranty, prevent possible damage and
increase the life of this equipment.
BRX 250 / BRX 500 Compact Flash
The quality of light and exceptional performance is the result of long research, application of demanding
principles, the long experience of ELINCHROM in lighting products for the studio and the utilisation of
the latest technology in this area.
Totally integrated to the range of ELINCHROM flashes, the BRX 250 - BRX 500 units maintain the tra-
ditional look and function that is ELINCHROM.
The controls provide continuously variable adjustment of the modelling lamp and the flash power with
precision over 5 f-stop, from full power 1/1 to 1/16 th.

FCC Class B Compliance Statement

This equipement has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15
of the FCC Rules and meets all requirements of the Canadian Interference-Causing Equipement Regulations. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipement generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipement does not cause harmful interferences to
radio or television reception, which can be determined by turning the equipement off and on, the user is encouraged
to correct the interferences by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipement and receiver.
- Connect the equipement into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ELINCHROM S.A. LTD. is not responsible for any radio or television interference caused by unauthorised modifications
of this equipement or the substitution or attachment of connecting cables and equipement other than those specified
by ELINCHROM S.A. LTD. The correction of interference caused by such unauthorised modification, substitution or
attachment will be the responsibility of the user.
3