Panel Mounting - WIKA A2G-10 Betriebsanleitung

5. Installation
should be installed in the same position to avoid loss of accuracy.
If a different installation position is required please specify when
ordering. Gauges with high pressure ranges can be installed in
different non-vertical mounting position, by simply adjusting the
zero point.
GB
Wall mounting
To screw down pierce three
prepunched holes by means
of a screwdriver

Panel mounting

It is not necessary to pierce holes when carrying
out assembly using a threaded bezel
6
WIKA Operating instructions air2guide Models A2G-10 and A2G-15