Malaguti Fantom F12R Bedienungsanleitung Seite 119

3.14.2 SUB‑MENU FUNCTION SELECTION
A) STAND BY:
• Selects functions of the Main
Menu and allows for time
adjustments.
Give the MODE button short
presses to select the functions
of the Main Menu.
The total distance travelled
(Total) is never reset and
remains even after the vehicle
is turned off. Holding the
MODE button down, when
the vehicle is at a standstill,
activates time adjustment.
If the MODE button is not
pressed for more than 4", the
sub‑menu will automatically
switch to the TD function.
A1) Time adjustment:
• Hold the MODE button down
for a while when the STAND‑BY
function is selected. Short presses
of the MODE button will increase
time by one hour every press.
Hold the MODE button down
for a while to switch to minute
adjustment, which is performed
in an identical manner.
B) TD FUNCTION (trip ‑ partial km or mph):
• This
distance travelled in km or
miles.
To reset, hold the MODE
button down until the display
is showing 000.0. The counter
is automatically reset when
999.9 km
Counting will thus be resumed
from 000.0.
C) LAP (Chronometer):
• With this function, you can
clock a journey. The function
is
when the vehicle sets off and
STOPS 3" after the vehicle
stops. This information is given
in MM' SS" up to an hour and
then switches to HH:MM. This
information can be reset by
holding the MODE button
down for about 2".
displays the partial
are reached.
automatically STARTED
7

2
3
4
5
6
ENG