Battery Level Indicator - Refco REF-METER Bedienungsanleitung

English
Perform the following steps to turn the Tank Capacity Mode Off:
Turning Tank Capacity Mode Off
1. While holding
will show on the display. This indicates that the Tank Capacity Mode is currently
on.
2. Turn the Tank Capacity Mode off by pressing
and the Alternate Numeric Display will turn off.
3. Press to return to normal operation.
The Tank Capacity Mode can be turned back on without retraining. The REF-
METER will remember the previous 0% and 100% set points until the unit is re-
trained as above. To turn the Tank Capacity Mode on without re-training, perform
the following steps:
Turning the Tank Capacity Mode On without Re-training
1. While holding
OFF will show on the display. This indicates that the Tank Capacity Mode is
currently off.
2. Turn the Tank Capacity Mode on by pressing
and the Alternate Numeric Display and Percent Indicator will turn on.
3. Press to return to normal operation.

Battery Level Indicator

The battery level indicator shows the relative strength of the batteries. Full power is
indicated by four bars. As the batteries are depleted, the number of bars displayed
decreases, until no bars are left. At this point, it is necessary to replace the
batteries (refer to the Battery Installation section above). If the battery power drops
to the point where the REF-METER can no longer function accurately, the power will
turn off automatically. When the batteries are replaced, and the scale is turned back
on, the REF-METER will resume operation with all previous setting intact.
down, press
down, press
. The SET TANK indicator will turn on, and ON
. The display will show OFF,
. The SET TANK indicator will turn on, and
. The display will show ON,
REF-METER User's Guide
11