Description Of Parts; Included Items; Technical Data; Important Safety Instructions - Silvercrest SFW 100 A2 Bedienungsanleitung

warmer is not permitted and could lead to injury
and/or damage to the product. The manufacturer
accepts no liability for any damage caused by
improper use.

Description of parts

Teddy lining, removable
1
Control unit
2
Function indicator
3

Included items

Immediately after unpacking, check that all the
items are present and that the product is in perfect
condition.
1 Foot warmer with removable teddy lining and
control unit
1 Set of operating instructions

Technical Data

Model:
Type:
IMPORTANT ADVICE – KEEP
THIS SAFE FOR FUTURE USE!
Important safety
instructions
Failure to comply with the following instructions can
cause personal injury or material damage (electric
shock, skin burns, fire).
The following advice on safety and hazards is in-
tended to protect your health and that of other peo-
ple as well as to protect the foot warmer. Please
observe these safety instructions and make sure
Introduction / Important safety instructions
SFW 100 A2
FW 10
Power supply:
Power input:
Dimensions:
Protection class:
Protection class
(water protection):
Electric field strength:
Magnetic field strength:
Magnetic flux density:
Material:
Surface of foot warmer:
Inside:
Manufacturer:
MGG Elektro GmbH
Königsbrückerstr. 61
01099 Dresden, Germany
that you pass on this manual together with the foot
warmer.
LIFE AND RISK OF ACCIDENTS
FOR INFANTS AND CHILDREN!
leave children unsupervised with the packag-
ing materials. Danger of suffocation.
ELECTRIC SHOCK! Do not use the
mains power cable for purposes for
220–240 V∼ /
50–60 Hz
100 W
approx. 26 x 26 x
30 cm (W x H x D)
II /
Foot warmer: IPX 1,
drip-resistant
Control unit: IPX0, no
moisture protection
max. 5000 V / m
max. 80 A / m
Max. 0.1 milli-Tesla
100 % polyester
teddy lining: 100 %
polyester
DANGER TO
DANGER OF
GB 23