mega macs 77
5 Initial Start-Up
EN
This section gives a description of how to switch the device on and off as
well as all the necessary steps for the first use of the device.
5.1
Charging the Battery through Plug Socket
Prior to initial start-up of the device, charge the battery for at least 8 to 10
h while the device is switched off.
Proceed as follows to charge the battery through wall socket:
1. Insert the voltage supply plug into the device's socket.
2. Insert the power plug into the plug socket.
5.2
Charging the Battery through Docking Station
Prior to initial start-up of the device, charge the battery for at least 8 to 10
h while the device is switched off.
Proceed as follows to charge the battery through docking station:
1. Insert the voltage supply plug into the docking station port.
2. Insert the power plug into the plug socket.
5.3
Switching on the Device
Proceed as follows to switch on the device:
1. Briefly push the ON/OFF button.
2. Read the GTCs and confirm them at the end of the text.
52
The battery is being charged.
The battery is being charged.
NOTE
When starting the device for the first time and after every
software update, you need to confirm the general terms and
conditions (GTC) of the Hella Gutmann Solutions GmbH.
Otherwise, certain device functions will be unavailable.
The GTCs appear.
Charging the Battery through Plug Socket
Initial Start-Up