Menu Options - switel BCF989 Bedienungsanleitung

4

Menu Options

1. Press the menu button
the screen. See Fig. 11.
2. The main menu contains 7 submenus.
4
Camera Selection ( Camera Select )
.1
In this submenu you can select between multiple cameras if the cameras have
been paired. Also, you can tap the auto-scan icon
An auto-scan feature will display images from each camera in eight-second
intervals. See Fig. 12.
4
.2 Feed Timer Setting ( Feed Timer )
In this submenu you can set up feed timer to remind you the timing. See Fig. 13.
4
.3 Temperature Setting ( Temp. Setting )
1. In this submenu you can choose the temperature unit between degrees
Celsius or degrees Fahrenheit. See Fig. 14.
2. You can set the temperature range of the temperature alert. If you select "Alert
On" to enable the temperature alert and the temperature is outside
the range, a warning sound will be emitted from the monitor unit. See Fig. 14.
4
.4 Camera Setting ( Camera Setting )
The system comes with a camera unit that has already been paired with the
monitor unit. The "Cam Setting" function gives each baby unit a separate
channel on the monitor unit. This is necessary for configuring additional
camera units.
1. If you want to add a new camera, please choose which number of cameras
you want to add, and then select add camera icon
The screen will show a pairing picture, and then please also press and hold
the power button less than 1 second on the camera side at the same time.
2. If you want to delete a paired camera, please choose which number of
cameras you want to delete, and then select delete camera icon
the camera (See Fig. 15).
4
.5 Brightness Setting ( Brightness )
In this submenu you can adjust brightness of the screen. See Fig. 16.
4
.6 Auto Tracking Setting ( Auto Tracking )
In the submenu you can select "On" to enable the auto tracking function or
select "Off " to disable it. When auto tracking is enabled, the camera will track
moving objects in the camera viewing range. Please see Fig. 17.
Note 1: The audio will be muted when motor rotates.
Note 2: When the zoom in function is enabled, auto tracking will be disabled
4
until the user zooms out.
on the monitor unit to display the main menu on
for auto-scan function.
(See Fig. 15).
to delete