jbc Advanced AD 2950 Instruktionshandbuch Seite 10

ENGLISH
Advanced series cartridge
The cartridge is made of the heating element
which has the heating system, a temperature
sensor and a long life tip.
The long-life tip is basically made of:
1 Copper
2 Iron
3 Chromium
4 Tin plate
Tip care recommendations
Except for the copper core, the rest of metals
are placed galvanically on relatively thin layers,
therefore it is necessary to avoid anything which
could cause their destruction.
To clean the tips, use the sponge included with
the stand and check that it is slightly moisted.
Only deionised water (car battery water) Only deionised water (car battery water) Only deionised water (car battery water)
Only deionised water (car battery water) Only deionised water (car battery water)
should be used in order to wet the sponge should be used in order to wet the sponge should be used in order to wet the sponge. If should be used in order to wet the sponge should be used in order to wet the sponge
normal water was to be used, it is very likely
that the tip will become dirty due to the salts
dissolved within the water.
To re-tin the soldering tips, we recommend
using the TT 9900 tip tinner/cleaner ref. 9900000.
Fume extractor accessories
For 2245 handpiece
Ref. 0003435
Specially designed for the Advanced Series
2210 and 2245 handpieces. Easily clips onto
the handpiece and can be quickly removed for
easy maintenance.
JBC reserves the right to make technical changes without
prior notification.
For 2210 handpiece
Ref.0003450
8