Cd Operations; Playing A Cd - JVC KD-SX992R Bedienungsanleitung

Playing a CD

1
Open the control panel.
Note:
When an external component is connected to the AUX
jack in the control panel, be careful of handling a CD.
2
Insert a disc into the loading slot.
3
Close the control panel by hand.
The unit turns on,
draws the disc and
starts playback
automatically.

CD OPERATIONS

The CD–in indicator lights up.
Total playing time of
the inserted disc
Elapsed
playing time
Source indication will change to the
clock time if "CLOCK" is set to "ON".
(See page 27)
Notes:
• When a disc is already in the loading slot, selecting
"CD" as the source starts CD play.
• When a disc is inserted upside down, the disc
automatically ejects (if the control panel is open). If
the control panel is closed, "PLEASE" and
"EJECT" appear alternately.
• If you change the source, CD play also stops
(without ejecting the disc).
Next time you select "CD" as the source, CD play
starts from where playback has been stopped
previously.
Total track number
of the inserted disc
Current track
19