Other Main Functions; Setting The Clock; Changing The General Settings (Psm); Basic Procedure - JVC KD-SX992R Bedienungsanleitung

Setting the clock

1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 26.)
2
Set the hour.
1 Select "CLOCK H (hour)" if not shown on
the display.
2 Adjust the hour.
1
3
Set the minute.
1 Select "CLOCK M (minute)."
2 Adjust the minute.
1
4
Set the clock system.
1 Select "24H/12H."
2 Select "24H" or "12H."
1
5
Finish the setting.

OTHER MAIN FUNCTIONS

To check the current clock time while the unit
is turned off, press DISP (display).
The power turns on, the clock time is shown for 5
seconds, then the power turns off.
Changing the general settings
(PSM)
You can change the items listed on the next page
by using the PSM (Preferred Setting Mode) control.

Basic Procedure

1
2
2
2
3
2
4
5
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 26.)
Select the PSM item you want to
adjust. (See page 26.)
Adjust the PSM item selected.
Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
Finish the setting.
25