Cd Operations; Playing A Cd - JVC kd-sx997r Bedienungsanleitung

CD OPERATIONS

Refer "MP3 OPERATIONS" on pages 26 to 29 for
operating MP3 discs.

Playing a CD

1
Open the control panel.
Notes:
• When an external component is connected to
the AUX input jack on the control panel, be
careful of handling a CD.
• When a CD is already in the loading slot,
pressing CD CD-CH (AUX) turns on the unit
and starts playback automatically.
2
Insert a CD into the loading slot.
3
Close the control panel by hand.
All tracks will be played repeatedly until you
stop playback.
20
The unit turns on,
draws the CD and
starts playback
automatically.
The display changes to show the following:
CD–in indicator Current source indication*
Total playing time
of the inserted disc
Elapsed playing time Current track
* When "CLOCK" is set to "ON" (see page 34),
the current source indication will soon change to
the clock time.
Notes:
• When a CD is inserted upside down, the CD
automatically ejects (if the control panel is open).
If the control panel is closed, the source changes to
the tuner, "PLEASE" and "EJECT" appear
alternately on the display.
• When you open the control panel by pressing 0, the
CD automatically ejects.
• If there is no CD in the loading slot, you cannot
select CD as the source. "NO DISC" appears on
the display.
• If the current disc is a CD Text, disc title/performer
and then track title will automatically appear.
Total track number
of the inserted disc