JVC KD-SX992R Bedienungsanleitung Seite 28

To select the telephone muting –
This mode is used when a cellular phone system is
connected. Depending on the phone system used,
select either "MUTING 1" or "MUTING 2," whichever
mutes the sounds from this unit.
When shipped from the factory, this mode is
deactivated.
• MUTING 1: Select this if this setting can mute the
sounds.
• MUTING 2: Select this if this setting can mute the
sounds.
• OFF: Cancels the telephone muting.
To turn on/off the key-touch tone –
You can deactivate the key-touch tone if you do not
want it to beep each time you press a button.
When shipped from the factory, the key-touch tone
is activated.
• ON: Activates the key-touch tone.
• OFF: Deactivates the key-touch tone.
To select the scroll mode –
You can select the scroll mode for the disc
information if it consists of more than 8 characters.
When shipped from the factory, Auto Scroll mode
is set to "ONCE."
• ONCE: Scrolls only once.
• AUTO: Repeats the scroll
(in 5-second intervals).
• OFF: Cancels Auto Scroll.
28
To select the external component to use
TEL
–
You can connect the external component to the CD
changer jack on the rear using the Line Input Adaptor
KS-U57 (not supplied).
To use the external component as the playback
source through this unit, you need to select which
component – CD changer or external component
– to use.
When shipped from the factory, CD changer is
selected as the external component.
• LINE IN:
• CHANGER: To use the CD changer.
BEEP
Note:
For connecting the Line Input Adaptor KS-U57 and the
external component, refer to the Installation/Connection
Manual (separate volume).
To adjust the auxiiliary input level
–
Adjust the auxiliary input properly when an external
component is connected to the AUX input jack.
SCROLL
When shipped from the factory, the AUX input level
is set at level "00."
If the level of the connected component is not high
enough, increase the input level properly. Without
adjusting the line input level, you may be surprised
at a loud sound when you change the source from
an external component to another source.
EXT IN
To use the external component other
than CD changer.
AUX ADJ