Cognex In-Sight 5100 Handbuch Seite 5

Do not expose the image sensor to laser light; image sensors can be
l
damaged by direct, or reflected, laser light. If your application requires the
use of laser light that may strike the image sensor, a lens filter at the
corresponding laser's wavelength is recommended. Contact your local
integrator or application engineer for suggestions.
The In-Sight vision system does not contain user-serviceable parts. Do not
l
make electrical or mechanical modifications to In-Sight vision system
components. Unauthorized modifications may void your warranty.
Changes or modifications not expressly approved by the party responsible
l
for regulatory compliance could void the user's authority to operate the
equipment.
Service loops should be included with all cable connections.
l
Cable shielding can be degraded or cables can be damaged or wear out
l
more quickly if a service loop or bend radius is tighter than 10X the cable
diameter. The bend radius must be at least six inches from the connector.
Class A Equipment (broadcasting and communication equipment for office
l
work): Seller and user shall be notified that this equipment is suitable for
electromagnetic equipment for office work (Class A) and can be used
outside the home.
This device should be used in accordance with the instructions in this
l
manual.
5