Preparing The Product For Use; Safety Precautions Before Use; Unpacking; Safely Disposing Of Packaging Material - Videotec NXPTZT Bedienungsanleitung

6 Preparing the product for
use
Any change that is not expressly approved
by the manufacturer will invalidate the
guarantee.
The unit must not be dismantled or
tampered with. The only exceptions
are those concerning the assembly and
maintenance operations stipulated in this
manual.

6.1 Safety precautions before use

The appliance includes moving parts. Make
sure that the unit is positioned where it
is inaccessible under normal operating
conditions. Attach the warning label
supplied with the appliance, placing it near
the unit so that it can be seen easily.
Fig. 4
12

6.2 Unpacking

When the product is delivered, make sure that the
package is intact and that there are no signs that it
has been dropped or scratched.
In case of obvious signs of damage to the packaging
please contact the supplier immediately.
Keep the packaging in case you need to send the
product for repairs.
6.3 Contents
Check the contents to make sure they correspond
with the list of materials as below:
• Positioning unit
• Sunshield (2 if version with thermal camera)
• Box supplied:
• CD-ROM with installation software (for IP version
only)
• Allen wrench
• Windows washing kit
• Instruction manual
6.4 Safely disposing of packaging
material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.
When returning a faulty product we recommend
using the original packaging for shipping.
MNVCNXPTZT_1710_EN