Using; Cleaning - Klarstein Gulliver Bedienungsanleitung

EN
12

USING

1. Fill at least 0.5 L to ensure that kettle will not be dry boiling quickly. Recommended
temperature.
Recommended temperature:
• 60 °C for baby mixtures
• 70 °C for delicate teas(green/white)
• 90 °C for instant coffee or soup
• 100 °C for perfect black tea
2. Close the lid and make sure that it snaps in correctly. Otherwise, the auto switch off
function will not work reliably.
Place the kettle on the bases correctly. The buzzer will buzz, all the buttons will be
flashing once, If there is not any operation, all the button functions stand by
3. To heating: press the respective temperature button to select temperature
(60 °C/70 °C/80 °C/90 °C) you want and start heating immediately, the
indication light of selected button will keep flashing. For boiling water (100 °C)
just press the ON/OFF button on the right (without pressing a temperature button).
Once the water temperature reaches the target temperature, the buzzer will buzz
and the indication light will change to constant for 15s, the heater will automatic
turn off. If there is not any operation in 15s, the indication light will turn off. Press
selected button can cancel the heating program. Press other button will not stop the
heating program but change the target temperature to new selected temperature.
4. To keep warm press a temperature button to select temperature
(60 °C/70 °C/80 °C/90 °C),you want and then press the button on the left
to start keep warm program. Once the water temperature reaches the target
temperature, the indication light of selected button will change from flashing to
constant, and the machine will stop heating and start to keep warm. Pressing the
left button can cancel the keep warm program.

CLEANING

1. Before cleaning, always unplug the appliance. Never rinse or immerse the kettle
or base unit in water. Just wipe with a damp cloth, using no abrasive detergents.
Occasionally rinse out the kettle with clean water.
2. To clean the mesh filter, grab the strainer insert and lift out.
3. Cleaning the heating plate- superficial spots of rust may appear on the base unit.
Remove with a stainless steel cleaning agent.
4. Decalcifying is recommended regularly, depending on water hardness. Fill the
kettle with water and decalcified according to decalcified product instructions. Do
not boil the solution as it may foam over. Afterwards, rinse kettle thoroughly with
fresh water.