Husqvarna LC 141Li Bedienungsanweisung Seite 114

To start
1. Turn the safety key under the battery cover to
positon "1".
2. Position yourself behind the product.
3. Hold down the ON/OFF button (1) on the panel until
the green LED (2) is lit. The green light indicates that
the product is active.
4. Loosen the start inhibitor.
5. To start mowing push the motor brake handle
towards the handlebar.
114
6. For model LC 141VLi, push the propulsion bar in
towards the handle in order to start the drive.
7. Set the mowing speed in 4 steps by pressing the
symbols for fast and slow on the panel.
SavE function
The product is equipped with a battery saving function
(SavE). In most cases SavE mode is the most optimum
when mowing and gives longest runtime. Activate the
function by pressing the SavE button. A green LED will
light to indicate that the function is on.
Deactivate the function by pressing the SavE button (1).
The green LED (2) will go out when the function is
deactivated.
The SavE function is automatically deactivated if the
ground conditions demand a higher output. The SavE
function is automatically reactivated as soon as the
ground conditions permits.
High load function
Under high load, e.g. when cutting high or damp grass
the motor automatically increases rpm. The motor will
return to standard mode when the load is reduced.
71 - 001 - 03.11.2016