Setting The Alarm Time - Silvercrest SPUV 90 A1 Bedienungsanleitung

Setting the alarm time

If the clock is set correctly, as described above:
1. Press the button AL1
indicator for the alarm function
blinks.
2. Press or hold the button HOUR
3. Press or hold the button MIN
4. Press the button AL1
time will be taken over.
Radio alarm call
When the alarm time is set correctly, as described above:
1. Set the desired radio station and the volume at which you wish to be
woken (see also chapter Radio Operation).
2. Repeatedly press the button AL1
reception
radio will now switch itself on.
3. Press the button
4. To deactivate the alarm function, repeatedly press the button AL1
u
AL2 until a symbol is no longer shown next to the indicator for the
alarm function
device returns to just a time display and the indicator for the alarm
function disappears.
y
resp. AL2
y
resp. AL2
appears in the display
o
to switch the radio off until the following day.
resp. in the display
u
for 2 seconds. In the display
resp. appears and the time indicator
r
to set the hours.
t
to set the minutes.
u
once again. The programmed alarm
y u
resp. AL2
j
. At the programmed time the
j
. After about 5 seconds the
- 11 -
until the symbol for radio
j
the
y
resp.