Inserting The Batteries; Placing - Silvercrest SPUV 90 A1 Bedienungsanleitung

Inserting the batteries

SPUV 90 A1:
You require 2 x 1.5 V batteries of the type Micro/AAA/LR03 and 1 battery
of the type CR 2032 (all items supplied).
1. Open the cover of the battery compartment
2. Insert the batteries into the battery compartment
polarity markings shown in the battery compartment
3. Close the cover of the battery compartment
SPUH 90 A1:
You require 2 x 1.5 V batteries of the type Micro/AAA/LR03 and 1 battery
of the type CR 2032 (all items supplied).
1. Open the cover of the battery compartment
device.
2. Insert the batteries into the battery compartment
polarity markings shown in the battery compartment
3. Close the cover of the battery compartment

Placing

• Place the projection clock onto a level surface.
• Position the projection clock such that the projection lens
an empty surface. The distance from the projection lens to the projection
area (ceiling or wall) must lie between 0,4 m and 3 m.
k
at the rear of the device.
k
k
, such that it engages firmly.
k
on the underside of the
k
k
, such that it engages firmly.
- 9 -
, paying heed to the
k
.
, paying heed to the
k
.
q
is directed onto