Presentation; J93 Clamp - Chauvin Arnoux J93 Bedienungsanleitung

J93 and J193 Hall effect ammeter clamps are used to measure DC currents up to 5000A and AC currents up to 3500A, without
opening the circuit

1.1. J93 CLAMP

The J93 clamp is powered by a battery.
Jaws.
Specific 4‑point
plug.
Guard.

1. PRESENTATION

Arm.
Battery com‑
partment cover.
Shielded cord.
ZERO
ON
OFF
300 V CA T IV
600 V CA T III
18
Zero adjustment.
Indicator that indicates that the
clamp is on or that the battery is
low.
Three‑position switch (ON,
OFF, battery test).