Inserting/Changing The Batteries - Bosch Quigo Plus Originalbetriebsanleitung

20 | English
Cross line laser
Operating temperature
Storage temperature
Max. altitude
Max. relative humidity
Pollution degree according IEC 61010-1
Laser class
Laser type
C
6
Divergence
Tripod mount
Batteries
Operating time, approx.
Weight according to EPTA-Procedure 01:2014
Dimensions (length × width × height)
A) The working range may be reduced by unfavourable environmental conditions (e.g. direct
sunlight).
B) Only non-conductive deposits occur, whereby occasional temporary conductivity caused
by condensation is expected.
The serial number (8) on the type plate is used to clearly identify your measuring tool.
Assembly

Inserting/changing the batteries

It is recommended that you use alkaline manganese batteries to operate the meas-
uring tool.
1 609 92A 4J4 | (16.08.2018)
Quigo Plus
+5 °C to +40 °C
–20 °C to +70 °C
2000 m
90 %
B)
2
2
635 nm, <1 mW
1
0.5 mrad (full angle)
1/4"
2 × 1.5 V LR3 (AAA)
>5 h
0.27 kg
65 × 65 × 65 mm
Bosch Power Tools