Bosch ACTIVE LINE PLUS Originalbetriebsanleitung Seite 64

OBJ_BUCH-3139-001.book Page 1 Wednesday, May 31, 2017 12:10 PM
Safety Notes
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Save all safety warnings and instructions for future
reference.
The term "battery" is used in these instructions to mean all
original Bosch eBike rechargeable battery packs.
 Do not open the drive unit yourself. The drive unit must
be repaired only by qualified experts and only with
original spare parts. This will ensure that the safety of the
drive unit is maintained. Unauthorised opening of the drive
unit will void warranty claims.
 All components mounted to the drive unit and all other
components of the eBike drive (e.g., the chainwheel,
chainwheel seat, pedals) may be replaced only with
identical components or components specifically
approved for your eBike by the bicycle manufacturer.
This protects the drive unit against overload and damage.
 Remove the battery pack from the eBike before begin-
ning work (e.g. inspection, repair, assembly, mainte-
nance, work on the chain, etc.) on the eBike, transport-
ing it by car or plane, or storing it. Unintentional
activation of the eBike system poses a risk of injury.
 The eBike system can switch itself on when the eBike is
pushed backwards.
 The push-assistance function may only be used when
pushing the eBike. Danger of injury when the wheels of
the eBike do not have ground contact while using the push-
assistance function.
 When the push-assistance function is activated, the
pedals turn at the same time. When the push-assistance
function is activated, make sure that there is enough space
between your legs and the turning pedals. There is a risk of
injury.
 Use only original Bosch battery packs approved for
your eBike by the manufacturer. Using other battery
packs can lead to injuries and pose a fire hazard. When
using other battery packs, Bosch shall not assume any
liability and warranty.
 After a ride, do not allow your unprotected hands or
legs to come into contact with the aluminium housing
of the drive unit. Under extreme conditions, such as con-
tinuously high torques at low travel speeds, or when riding
up hills or carrying loads, very high temperatures may be
reached on the aluminium housing.
63
The temperatures that may be reached at the drive unit
housing are influenced by the following factors:
– Ambient temperature
– Ride profile (route/gradient)
– Ride duration
– Assistance modes
– User behaviour (personal effort)
– Total weight (rider, eBike, luggage)
– Motor cover on the drive unit
– Heat dissipation properties of the bicycle frame
– Type of drive unit and type of gear-shifting
 Do not make any modifications to your eBike system or
fit any other products which would be suitable for in-
creasing the performance of your eBike system. This
normally reduces the lifetime of the system and risks
damage to the drive unit and the bike. There is also a risk of
losing the guarantee and warranty claims on the bike you
have purchased. By handling the system improperly you
are also endangering your safety and that of other road
users, thus running the risk of high personal liability costs
and possibly even criminal prosecution in the event of
accidents attributable to manipulation.
 Please observe all national regulations on registering
and using eBikes.
 Read and observe the safety warnings and instructions
in all operating instructions of the eBike system and in
the operating instructions of your eBike.
Product Description and
Specifications
Intended Use
The drive unit is intended only for driving your eBike and must
not be used for other purposes.
In addition to the functions shown here, changes to software
relating to troubleshooting and functional enhancements may
be introduced at any time.
Product Features (P.4)
The numbering of the components shown refers to the illus-
trations on the graphic pages at the beginning of the manual.
Individual illustrations in these operating instructions may dif-
fer slightly from the actual circumstances depending on the
equipment of your eBike.
1 Drive unit Active Line Plus
2 Speed sensor
3 Spoke magnet of the speed sensor