Cautions Before Connection; Connect A Decoder - Xoro HTL2722W Bedienungsanleitung

CONNECTIONS
Cautions before connecting
Carefully check the terminals for position and type before making any connections.
The illustration of the external equipment may be different depending on your model.
Loose connectors can result in image or colour problems. Make sure that all connectors
are securely inserted into their terminals.
Refer to the operating manual of the external device as well.
When connecting an external device, turn the power off to avoid any issues.
Connect a Decoder to the TV set
How to connect:
Connect the SCART Cable between the unit and the
Decoder.
How to display signals from the decoder:
1. Turn on your UNIT , press TV/AV button on the
remote control.
2. Push P+/P- to select SCART1AV and press V+/
ENTER to confirm.
3. Turn on your Decoder.
Note:
•
The unit receives CVBS (VIDEO) signal and RGB signal from SCART1 interface
and is able to identify the signal format automatically. The unit chooses the RGB
signal prior to the CVBS (VIDEO) signal.
•
To connect to external devices with AV terminals, you may use 21-pin Scart Con-
verter to connect to SCART interface on the unit, and the unit receives CVBS
(VIDEO) signal only.
TV
AV
SCART1AV
SCART2AV
S-VIDEO
YPb Pr
VGA
HDMI
MMD
19